38PK/42TPM

38PK/42TPM

Ducted Split-System
Electric Cooling Unit
Puron® (R-410A) Refrigerant

1.5 to 5.0 Nominal Tons

Categories

The 38P series energy efficient split condensing units incorporate innovative technology to provide reliable cooling performance. Units are pre-wired, pre-charged with Puron® R-410A refrigerant, and tested at the factory. These units can be placed on the side of a building or can be placed on a roof without roof curbs. Each unit is designed to occupy a minimal space. Piping and drain connections are readily accessible.

42TPM fan coil units are available in 6 sizes with nominal cooling capacity range from 1.5 to 5.0 Ton. Each unit is designed to occupy a minimum space. No complex system controls are required for Carrier fan coil units. Piping, drain, and wiring connections are readily accessible and mounting holes and slots are predrilled to save installation time and field labor expense.

Key Features

38PK Features

  • Every compact one-piece unit arrives fully assembled, charged, tested, and ready to run.
  • Designed especially for high ambient environment
  • EER (Energy Efficiency Ratio) up to 11.85
  • The small footprint coupled with the horizontal airflow design means that the 38P Series units can be installed within 200 mm (8 in) of an outside wall, on a roof, balcony or deck
  • Wide Range of Sizes
  • Application Versatility
  • Easy access for service and maintenance
  • Secure operation
  • Fast installation
  • External Service Valves
  • Built-in reliability

42TP Features

  • Every compact one-piece unit arrives fully assembled, tested, and ready to run
  • Designed especially for high ambient environment
  • EER (Energy Efficiency Ratio) ratings of up to 11.85
  • Standard wired control board kit to control the unit functions, with additional remote control
  • The drain pan is polyester powder coated for extra protection
  • Piping connection are field exchangeable; standard factory setup right hand side
  • Blower double inlet, Forward curved blades
  • 3 speed motor
  • Standard galvanized sheet metal casing
  • Low unit height suitable for low false ceiling application
  • Washable aluminum filter
  • Easy installation and maintenance
  • ½ inch thickness internal insulation with 24 kg/m^3 density
  • Low noise level suitable for all application

Options

38PK Field-Installed Accessories

  • Air deflector

42TP Field-Installed Accessories

  • Factory Installed Options
    • Electric Resistance Heater Package
  • Field Installed Options
    • UVC Ready

Performance Data

System Performance

Rating capacity @ T1 AMPS COP
Size
(tons)		 Condensing unit Model Fan coil model Cooling (Btu/h) CFM
18 38PKC18DS3 42TPM018-3 18500 659 7 11.85
24 38PKC24DS3 42TPM024-3 22500 913 8.3 11.85
30 38PKS30DS3 42TPM030-3 28200 1037 10.2 11.85
36 38PKS36DS3 42TPM036-3 35000 1320 13.1 11.85
48 38PKS48DS3 42TPM048-3 48400 1805 18.4 11.85
48 38PKS48DS2 42TPM048-3 48800 1816 6.8 11.85
60 38PKS60DS3 42TPM060-3 57400 2010 23.7 11.85
60 38PKS60DS2 42TPM060-3 61000 2233 8.6 11.85

Notes:

  1. Cooling capacity is based on following condition: Indoor Air Temperatures 27°C (DB) / 19°C (WB) and Outdoor Air temperatures 35°C (DB) / 24°C (WB)
  2. We reserve the right to change these specifications without notice and without incurring any liability

Reviews

There are no reviews yet.

Be the first to review “38PK/42TPM”

Your email address will not be published. Required fields are marked *

Related products

Recently viewed products

Reviews

There are no reviews yet.

Be the first to review “38PK/42TPM”

Your email address will not be published. Required fields are marked *