Desert Master™ 50TJM

The 50TJM units are single side discharge rooftop cooling unit utilizing electric heat as an option. Units are prewired, pre-charged with R-410A refrigerant, and tested at the factory. These units can be placed on the side of a building or can be placed on a roof without roof curbs. Each unit is designed to occupy a minimal space. Piping and drain connections are readily accessible.

Carrier’s Package Rooftop Unit software makes selecting and optimizing the 50TJM easy.

Options

Factory-Installed Options

Refrigerant sight glass – Installed on each circuit
Pre-coated fins – condenser only
Copper fins – condenser only
Copper fins – condenser and evaporator

Field-Installed Options

Electric Heater Package: The electric heater package is factory supplied for field installed. Heater assemblies are provided with internal fusing for protection of heater circuits not exceeding 25 amps each. All power wiring leads are 8 AWG and control wiring are 18AWG, both rated at 105°c. Auto reset thermo limit controls, magnetic heater contractors (24v coil) and terminal block are mounted in electric heater control box attached to heater assembly.
UVC Ready: The unit shall be UVC ready for easy installation. UVC Lamp is field supplied and field installed.
Softbag Filters: Softbag filters are factory supplied and field installed. Softbag filters are in compliance of Eurovent EU7.

Physical Data

Unit Size	Nominal Cooling	AHRI Efficiency – EER	Unit Dimensions (mm)(LxWxH)	Approx Unit Weight – (Kgs)
18	15 Ton	11.3	2440x2182x1348	860
24	20 Ton	11.5	2440x2182x1348	880
28	25 Ton	10.85	2920x2432x1374	1125
28	25 Ton	10.85	2818x2432x1374	935
34	30 Ton	10.5	3200x2432x1374	1150
34	30 Ton	10.5	2920x2432x1374	960

Reviews

There are no reviews yet.

Be the first to review “Desert Master™ 50TJM”